At 08:33 05/11/03, you wrote:
>then relaease the adjustment to allow
>me to take the wire off. I find the best thing to use is 2 inch plastic
>tape wrapped around the coil in 3 places to hold it in place
Hi
We use a similiar idea but by hand. The only thing I would add is
that as a normal practice we always wrap the tail wire around the coil so
that the person opening it will know which end to start from. And likewise
if we cut the wire off the coil we wrap the tail again or at least put a
bend in the wire.
Conor
